G6 L4-2.4L VIN B (2006)
5. Remove the liquid line and suction line nut from the thermal expansion valve (TXV).
6. Remove the suction line from the TXV.
7. Remove the liquid line from the TXV.
8. Remove the TXV screws.
9. Remove the TXV.
10. Remove and discard the sealing washers.
IMPORTANT: Cap all A/C components immediately to prevent system contamination.
INSTALLATION PROCEDURE
1. Uncap A/C components.
2. Install new sealing washers.
3. Install the TXV.
4. Install the TXV screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the TXV screws to 7 N.m (62 lb in).
5. Install the liquid line to the TXV.
6. Install the suction line to the TXV.
7. Install the liquid line and suction line nut to the TXV.
Tighten the nut to 20 N.m (15 lb ft).
8. Install the liquid line to the dash clip.
