G6 L4-2.4L VIN B (2006)
8. Connect the steering wheel module coil connector to the vehicle harness connector.
9. Install the CPA to the steering wheel module coil connector.
10. Install the driver/left outer trim cover to the I/P.
11. Connect the I/P module connector (1) to the vehicle harness connector (2).
12. Install the CPA to the I/P module connector (1).
13. Install the passenger/right outer trim cover to the I/P (3).
14. Connect the seat belt pretensioner-RF connector.
15. Install the CPA to the seat belt pretensioner-RF connector.
16. Install the right lower center pillar trim.