G6 L4-2.4L VIN B (2006)
13. Insert a 0.25 mm gage (1) between the rack (2) and the inner tie rod housing in order to check both stakes. The feeler gage (1) must not pass
between the rack and the housing stake.
14. Slide the shock dampener (2) over the inner tie rod housing (3) until the front lip of the shock dampener (2) bottoms against the inner tie rod
housing (3).
15. To assemble the rack and pinion boot.
Steering Gear Cylinder Pipe Assemblies/O-Ring Seals Replacement - Off Vehicle
Steering Gear Cylinder Pipe Assemblies/O-Ring Seals Replacement - Off Vehicle (HPS)
Removal Procedure