G6 V6-3.5L (2009)
Installation Procedure
1. Install the OnStar module bracket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Tighten the OnStar bracket bolts.
Tighten the bolts to 10 Nm (89 lb in).
3. Install the communication interface module. Refer to Communication Interface Module Replacement (See: Communication Interface Module
Replacement).
4. Install the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).