G6 V6-3.6L (2007)
4. Position the upper plenum panel to the vehicle using 3-dimensional measuring equipment. Clamp the panel in place.
5. Plug weld accordingly.
6. Clean and prepare all of the welded surfaces.
7. Install all of the related panels and components.
8. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
9. Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.
10. Connect the negative battery cable.
11. Enable the SIR system. Refer to SIR Disabling and Enabling.
