G6 V6-3.6L (2007)
8. Remove the mounting bolts for the rear crossmember brace.
9. Remove the rear crossmember brace.
Installation Procedure
Important: In steps 1-8, use a transmission jack or the help of an assistant to install the support brace, floor tunnel brace, and the rear
crossmember brace in the vehicle.
1. Position the support brace (2) on the cradle, for vehicles equipped with the 3.5L (LZ4) or 3.9L (LZ9) engines.
Notice: Refer to Fastener Notice.
2. Install the support brace bolts (1).
Tighten the bolts to 100 N.m (73 lb ft) plus 180 degrees rotation.