G6 V6-3.6L (2007)
1. Remove the rear seat back assembly.
2. Remove the push pin retainer (2) from the lock pillar trim (1).
3. Pull the lock pillar trim (1) away from the body to remove.
Installation Procedure
1. Align the lock pillar trim (1) to the body.
2. Push the lock pillar trim (1) towards the body to engage the trim panel to body retainers.
3. Install the push pin retainer (2).
4. Install the rear seat back assembly.
Body Rear Corner Upper Garnish Molding Replacement (Coupe)
Body Rear Corner Upper Garnish Molding Replacement (Coupe)
