G6 V6-3.6L (2007)
19. If the sunroof window seal is low in the rear, adjust the three screws in the rear.
20. Close the sunshade to gain access to the screws.These fasteners do not have tolerance compensators but may need to be tightened more.
21. IMPORTANT: If the sunroof module needed adjustment and could not be achieved in the front or the rear, the module may be misaligned to the
roof.
It will be necessary to loosen all fasteners except the four leveling retainers in the four corners, this will allow the sunroof module to be align to the
roof panel.
Loosen the sunroof module bolts. Sunroof Module Assembly Replacement (C3Y) Sunroof Module Assembly Replacement (CF5).
22. Re-tighten the fasteners.
23. If the seal is not repairable, it will be necessary to replace it.
24. Inspect the sunroof for proper operation.