G6 V6-3.6L (2007)
6. Remove the brake caliper bracket bolts (2).
7. Remove the rear brake caliper bracket.
8. Inspect the brake mounting and hardware.
9. Inspect the brake caliper bracket.
10. Replace the brake caliper bracket if cracked or damaged.
Installation Procedure
1. Install the brake caliper bracket.
Notice: This is a self-retaining fastener joint that does not require thread locking compounds. Do not attempt to clean the threads with a standard
tap. If a standard tap is used, damage to the joint threads will occur.
Notice: Refer to Fastener Notice .
2. Install the brake caliper mounting bracket bolts (2).
Tighten the brake caliper mounting bracket bolts to 130 N.m (96 lb ft).