G6 V6-3.6L (2007)
4. Install the brake rotor to the hub/axle flange. Use the matchmark made prior to removal for proper orientation to the flange.
5. If the brake rotor was removed and installed as part of a brake system repair, measure the assembled LRO of the brake rotor to ensure optimum
performance of the disc brakes. Refer to Brake Rotor Assembled Lateral Runout Measurement . See: Testing and Inspection/Brake Rotor
Assembled Lateral Runout Measurement
6. If the brake rotor assembled LRO measurement exceeds the specification, bring the LRO to within specifications. Refer to Brake Rotor
Assembled Lateral Runout Correction . See: Testing and Inspection/Brake Rotor Assembled Lateral Runout Correction
7. Install the brake caliper mounting bracket an caliper as an assembly to the suspension knuckle.
8. Install the tire and wheel assembly.
9. Lower the vehicle.
10. If the brake rotor was refinished or replaced, or if new brake pads were installed, burnish the pads and rotors. Refer to Brake Pad and Rotor
Burnishing .