G6 V6-3.6L (2007)
Intake Manifold: Service and Repair
Upper Intake Manifold Replacement
Upper Intake Manifold Replacement
Removal Procedure
1. Remove the fuel injector sight shield.
2. Remove the air cleaner outlet duct.
3. Disconnect the fuel feed line (1) quick connect fitting from the fuel rail.
4. Remove the fuel feed pipe line nut (2) and remove the fuel feed line clip from the stud.
5. Reposition the fuel feed line out of the way.
6. Remove the coolant air bleed hose/pipe clip bolt (3) from the upper intake manifold.
7. Reposition the coolant air bleed hose clamp (2) at the water outlet.
8. Remove the coolant air bleed hose from the water outlet.