G6 V6-3.6L (2007)
![background image](/pontiac/g6/v6-3.6l/Page-747008.png)
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
damage to parts and systems.
3. Install the secondary camshaft drive chain shoe bolt.
Tighten the secondary camshaft drive chain shoe bolt to 23 Nm (17 lb ft).
4. Install the left bank secondary camshaft drive chain tensioner. See: Service and Repair/Overhaul/Repair Instructions/112. Secondary Timing Chain
Tensioner Installation - Left Side
5. Install the engine front cover. See: Timing Cover/Service and Repair
6. Install the spark plugs. See: Tune-up and Engine Performance Checks/Spark Plug/Service and Repair
Secondary Timing Chain Tensioner Shoe Replacement - Right
SECONDARY TIMING CHAIN TENSIONER SHOE REPLACEMENT - RIGHT
Removal Procedure
1. Remove the spark plugs in order to ease crankshaft/engine rotation. See: Tune-up and Engine Performance Checks/Spark Plug/Service and Repair