G6 V6-3.6L (2007)
Important: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
6. Tighten the camshaft position actuator bolt. See: Service and Repair/Overhaul/Repair Instructions/106. Camshaft Position Actuator Installation -
Left Side Exhaust
7. Install the left intake and exhaust camshaft position actuator solenoids. See: Variable Valve Timing Solenoid/Service and Repair
8. Install the left intake and exhaust camshaft position sensors. See: Powertrain Management/Computers and Control Systems/Camshaft Position
Sensor/Service and Repair
9. Install the left camshaft cover. See: Cylinder Head Assembly/Valve Cover/Service and Repair
10. Install the lower intake manifold.
Second Design
CAMSHAFT POSITION ACTUATOR REPLACEMENT - BANK 2 (LEFT SIDE) EXHAUST - SECOND DESIGN
Tools Required: EN-48313 Timing Chain Retention Tool
Important: To identify a camshaft drive design, refer to Camshaft Timing Drive Design Identification. See: Timing Component Alignment
Marks/Locations