G6 V6-3.6L (2007)
Important: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
6. Tighten the camshaft position actuator. See: Service and Repair/Overhaul/Repair Instructions/104. Camshaft Position Actuator Installation - Right
Side Exhaust
7. Install the right intake and exhaust camshaft position actuator solenoids. See: Variable Valve Timing Solenoid/Service and Repair
8. Install the right intake and exhaust camshaft position sensors. See: Powertrain Management/Computers and Control Systems/Camshaft Position
Sensor/Service and Repair
9. Install the right camshaft cover. See: Cylinder Head Assembly/Valve Cover/Service and Repair/Camshaft Cover Replacement - Right Side
10. Install the lower intake manifold. See: Intake Manifold/Service and Repair
Second Design
CAMSHAFT POSITION ACTUATOR REPLACEMENT - BANK 1 (RIGHT SIDE) EXHAUST - SECOND DESIGN
Tools Required: EN-48313 Timing Chain Retention Tool
Important: To identify a camshaft drive design, refer to Camshaft Timing Drive Design Identification. See: Timing Component Alignment