G6 V6-3.6L (2007)
2. Install the air temperature actuator.
Notice: Refer to Fastener Notice.
3. Install the air temperature actuator screws.
Tighten the screws to 1.5 N.m (13 lb in).
4. Close the I/P compartment door. Refer to Instrument Panel Compartment Replacement.
5. Install the fuse labeled HVAC CTRL (BATT).
6. Calibrate the actuator. Refer to Actuators Recalibration. See: Testing and Inspection/Programming and Relearning
Mode Actuator Replacement
Mode Actuator Replacement
Removal Procedure
1. Remove the fuse labeled HVAC CTRL (BATT).
2. Remove the left closeout panel.
3. Remove the knee bolster.