G6 V6-3.6L (2007)
Fluid - M/T: Service and Repair
Transmission Fluid Checking
Transmission Fluid Checking
Important:
^
It is not necessary to check the fluid level unless the fluid has been changed or a leak is suspected.
^
Inspect the fluid level only when the engine is OFF. Ensure the vehicle is level. The transaxle must be cold.
Raise and support the vehicle. Refer to Vehicle Lifting.
1. Remove the fluid level check plug (1).
2. Verify that the fluid is level with the opening.
3. If the transaxle is not properly filled, carefully add GM P/N 21018899 manual transmission fluid until it begins to flow out of the fill/check plug.
Notice: Refer to Fastener Notice.
4. Install the fluid level check plug (1).
Tighten the fluid level check plug to 25 N.m (18 lb ft).
5. Lower the vehicle.
