G6 V6-3.6L (2007)
Front Steering Knuckle: Service and Repair
Rear Suspension
Knuckle Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the rear tire and wheel assembly.
3. Disconnect the rear park brake cable from the park brake actuator and position aside.
Notice: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
4. Remove the brake caliper and bracket as an assembly and support it with heavy mechanics wire or equivalent.
5. Remove the wheel bearing/hub assembly.
6. Remove the lower shock to knuckle bolt.