G6 V6-3.6L (2007)
Band Apply Servo: Service and Repair
4T65-E - Automatic Transaxle
Reverse Servo Replacement
Reverse Servo Replacement
Removal Procedure
1. Remove the air cleaner outlet duct.
2. Remove the battery. Refer to Battery Replacement.
3. Depress the reverse servo cover (40).
4. Remove the snap ring (39).
5. Pull the O-ring seal (41) out through the slot in the case.
6. Use side cutting pliers in order to cut the servo cover O-ring seal (41).
7. Depress the reverse servo cover (40), grasp one end of the cut seal (41) and pull the seal (41) out of the servo cover (40).
8. Remove the reverse servo cover (40).