G6 V6-3.6L (2007)
Notice: Refer to Fastener Notice.
1. Install the transaxle mount into the vehicle and tighten the bolts.
Tighten the transaxle mount bolts to 90 N.m (66 lb ft).
2. Install the transaxle mount through bolt.
Tighten the transaxle mount through bolt to 90 N.m (66 lb ft).
3. Lower the vehicle.
Transmission Rear Mount Replacement
Transmission Rear Mount Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left tire and wheel.
3. Using a suitable jack stand, support the rear of the powertrain.
