G6 V6-3.9L (2009)
5. Disconnect the antenna lead (1) from antenna module/antenna base.
6. Cut off the visible end of the coaxial antenna cable (1) from the wiring harness at the rear.
Installation Procedure
1. Install the coaxial antenna cables into the vehicle.
2. Use electrical tape, or tie straps, to secure the antenna extension cable to the wiring harness.
Secure the cable to the harness at least every 150 mm (6 in).
3. Connect the antenna lead (1) to the I/P extension cable.
4. Connect the antenna lead (1) to the antenna module/antenna base.
5. Install the carpet. Refer to Front Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair)
and Rear Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair).
6. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement (Sedan and Coupe) (See: Body and Frame/Seats/Seat Back/Service and
Repair/Rear Seat Back Cushion Replacement (Sedan and Coupe))Rear Seat Back Cushion Replacement (Convertible) (See: Body and
Frame/Seats/Seat Back/Service and Repair/Rear Seat Back Cushion Replacement (Convertible)).
