G6 V6-3.9L (2009)
![background image](/pontiac/g6/v6-3.9l/Page-2286002.png)
7. Remove the dash panel.
Installation Procedure
Note: The service part comes as an assembly that includes the plenum lower panel. If the repair does not require the plenum, remove the plenum
before you install the dash panel.
Note: If the location of the original plug weld holes can not be determined, space the plug weld holes every 40 mm (11/2 in) apart.
1. Drill 8 mm (5/16 in) plug weld holes in the service part as necessary in the corresponding locations noted on the original panel.