G6 V6-3.9L (2009)
14. Install both stabilizer links to the stabilizer bar.
Tighten the stabilizer link nut to 65 Nm (48 lb ft) plus 180 degree rotation.
15. Install the tie rod ends to the steering knuckles. Refer to Steering Linkage Outer Tie Rod Replacement (See: Steering and
Suspension/Steering/Tie Rod/Service and Repair/Steering Linkage Outer Tie Rod Replacement).
16. Install the lower ball joints to the steering knuckles.
1. Tighten the ball stud to steering knuckle pinch nut to 50 Nm (37 lb ft).
2. Reverse the nut 3/4 of a turn.
3. Tighten to 50 Nm (37 lb ft) plus 60 degrees.
17. Connect the ABS sensor to the wheel speed sensor and frame.
18. Install the radiator air lower baffle. Refer to Radiator Air Lower Baffle and Deflector Replacement (See: Engine, Cooling and Exhaust/Cooling
System/Radiator/Service and Repair).
19. Install the engine splash shields. Refer to Engine Splash Shield Replacement - Left Side (See: Splash Guard/Service and Repair/Engine Splash