G6 V6-39L (2009) Convertible Top Hydraulic Hose Service and Repair
Trim Replacement - Left Side (Convertible) (See: Interior Moulding / Trim/Trim Panel/Service and Repair)Rear Compartment Side Trim
Replacement - Left Side (Coupe/Sedan) (See: Interior Moulding / Trim/Trim Panel/Service and Repair) and Rear Compartment Front Trim Panel
Replacement (Convertible) (See: Interior Moulding / Trim/Trim Panel/Service and Repair).
7. Disconnect the 2 quick releases (3) from the folding top cylinder valve.
8. Locate the pair of cylinder hoses that need replacement. Refer to Folding Top Hydraulic Cylinder Hose Identification (See: Locations/Folding
Top Hydraulic Cylinder Hose Identification).
9.
Disconnect the hose set from the cylinder valve, by removing the retaining screw (1 or 2) and then pull outward from the valve.
10. Install a new O-ring on each hose that was removed.
11. Install the new hoses to the cylinder valve until fully seated.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
12. Install the hose retaining screw to the cylinder valve.
Tighten the bolts to 5 Nm (44 lb in).
13. Connect the 2 quick releases (3) to the folding top cylinder valve.