G6 V6-3.9L (2009)
6. Insert the J 38125-12A into the corresponding terminal release cavity. The release cavities are the 2 center rows of cavities on one half of the
connector.
7. Pressing the J 38125-12A tool in the release cavity of the terminal you are removing, gently pull the wire out of the back of the connector. Always
remember never use force when pulling a terminal out of a connector. See the release tool cross reference in the Reference Guide of the J-38125
to ensure that the correct release tool is used.
Terminal Repair Procedure
Use the appropriate terminal and crimper in the J-38125 in order to replace the terminal.
Tyco/AMP Connectors (Door Module)
Tyco/AMP Connectors (Door Module)
Special Tools