G6 V6-3.9L (2009)
8. Install the spark plug wires to the ignition coil.
9. Install the HO2S electrical connector clip to the ignition coil bracket.
10. Connect the ignition coil electrical connector (2).
11. Connect the MAP sensor electrical connector (1).
12. Install the PCV fresh air tube to the right side valve rocker arm cover.
13. Connect the PCV fresh air tube to the air cleaner outlet duct. Refer to Plastic Collar Quick Connect Fitting Service (See: Powertrain
Management/Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
14. Install the engine coolant crossover pipe. Refer to Engine Coolant Crossover Pipe Replacement (LZE, LZ4) (See: Cooling System/Coolant
Line/Hose/Service and Repair)Engine Coolant Crossover Pipe Replacement (LZ9) (See: Cooling System/Coolant Line/Hose/Service and Repair).
15. Install the generator. Refer to Generator Replacement (LE5) (See: Starting and Charging/Charging System/Alternator/Service and Repair
)Generator Replacement (LY7) (See: Starting and Charging/Charging System/Alternator/Service and Repair)Generator Replacement (LZ4) (
See: Starting and Charging/Charging System/Alternator/Service and Repair)Generator Replacement (LZ9) (See: Starting and Charging/Charging
System/Alternator/Service and Repair).