G6 V6-3.9L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Position the engine mount snubber bracket to the engine.
2. Install the engine mount snubber bracket to engine bolts and tighten to 25 Nm (18 lb ft).
3. Install the engine mount snubber. Refer to Engine Mount Snubber Replacement (See: ).
Engine Mount Snubber Replacement
Engine Mount Snubber Replacement
Removal Procedure
1. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair).
2. Remove the engine mount snubber to engine mount snubber bracket bolts.
3. Lift the engine mount snubber into the vertical position.