G6 V6-3.9L (2009)
Housing Assembly HVAC: Service and Repair
HVAC Module Assembly Replacement
Removal Procedure
1. Remove the air conditioner (A/C) lines from the thermal expansion valve. Refer to Air Conditioning Evaporator Thermal Expansion Valve
Replacement (See: Expansion Block/Orifice Tube/Service and Repair).
2. Remove the heater hose from the heater core. Refer to Heater Inlet Hose Replacement (LZE, LZ4, LZ9) (See: Heater Hose/Service and
Repair/Heater Inlet Hose Replacement)Heater Inlet Hose Replacement (LY7) (See: Heater Hose/Service and Repair/Heater Inlet Hose
Replacement)Heater Inlet Hose Replacement (LE5) (See: Heater Hose/Service and Repair/Heater Inlet Hose Replacement) and Heater Outlet
Hose Replacement (LY7) ()Heater Outlet Hose Replacement (LE5) ().
3. Remove the instrument panel (I/P) assembly. Refer to Instrument Panel Assembly Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
4. Remove the recirculation actuator wire harness connector.
5. Remove the air temperature actuator wire harness connector.
6. Remove the mode actuator wire harness connector.
7. Remove the blower motor wire harness connector.
8. Remove the blower motor resistor wire harness connector.
9. Remove the left hand side window defogger outlet duct.