G6 V6-3.9L (2009)
4. Install the blower motor resistor wire harness connector.
5. Install the blower motor wire harness connector.
6. Install the mode actuator wire harness connector.
7. Install the air temperature actuator wire harness connector.
8. Install the recirculation actuator wire harness connector.
9. Install the I/P assembly. Refer to Instrument Panel Assembly Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair).
10. Install the heater hoses to the heater core. Refer to Heater Inlet Hose Replacement (LZE, LZ4, LZ9) (See: Heater Hose/Service and
Repair/Heater Inlet Hose Replacement)Heater Inlet Hose Replacement (LY7) (See: Heater Hose/Service and Repair/Heater Inlet Hose
Replacement)Heater Inlet Hose Replacement (LE5) (See: Heater Hose/Service and Repair/Heater Inlet Hose Replacement) and Heater Outlet
Hose Replacement (LY7) ()Heater Outlet Hose Replacement (LE5) ().
11. Install the A/C lines to the thermal expansion valve. Refer to Air Conditioning Evaporator Thermal Expansion Valve Replacement (See:
Expansion Block/Orifice Tube/Service and Repair).