G6 V6-3.9L (2009)
Fluid - A/T: Service and Repair
6T40/6T45 - Automatic Transmission
Transmission Fluid Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
2. Remove the fluid drain plug (1).
3. Drain transmission fluid into a suitable container.
Caution: Refer to Component Fastener Tightening Caution (See: Service Precautions/Vehicle Damage Warnings/Component Fastener
Tightening Caution).
4. Install the fluid drain plug (1) and tighten to 12 Nm (106 lb in).
Installation Procedure