G6 V6-3.9L (2009)
Battery Current Sensor: Service and Repair
Battery Current Sensor Replacement
Removal Procedure
1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (With LY7) (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Replacement (With LE5) (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Replacement (LZ9) (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Replacement (LZ4) (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair).
2. Ensure that the location measurement of the battery current sensor was recorded for reference during installation.
3. Squeeze the ground ends of the negative battery cable together and remove the sensor (1) from the cable.
Installation Procedure