G6 V6-3.9L (2009)
![background image](/pontiac/g6/v6-3.9l/Page-1073003.png)
4. Position the heater inlet and outlet pipes and install the pipe bracket to the throttle body studs.
5. Install the heater inlet and outlet pipe nuts (1).
Tighten the nuts to 10 Nm (89 lb in).
6. Connect the ETC electrical connector (2).
7. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
8. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair).