G6 V6-3.9L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the ignition coil studs (4), if necessary.
Tighten the studs to 25 Nm (15 lb ft).
2. Install the ignition coil (3).
3. Install the ignition coil nuts (2).
Tighten the nuts to 25 Nm (15 lb ft).
4. Install the ignition coil bolts (1).
Tighten the bolts to 25 Nm (15 lb ft).
5. Connect the right side spark plug wires to the ignition coil.