G6 V6-3.9L (2009)
1. Install the battery current sensor (1) by passing the ground ends of the negative battery cable through the sensor.
2. Measure from the same end as earlier, and slide the current sensor to that measurement on the negative battery cable.
3. Install the battery negative cable. Refer to Battery Negative Cable Replacement (With LY7) (See: Battery/Battery Cable/Negative/Service and
Repair)Battery Negative Cable Replacement (With LE5) (See: Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable
Replacement (LZ9) (See: Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable Replacement (LZ4) (See: Battery/Battery
Cable/Negative/Service and Repair).