G6 V6-3.9L (2009)
7. Remove the 3 trailing arm to knuckle through bolts (1).
8. Lower the trailing arm to gain access to the trailing arm to bracket bolt and nut.
9. Remove the trailing arm to bracket bolt and nut.
10. Separate the trailing arm from the bracket and remove the trailing arm from the vehicle.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Position the trailing arm to the bracket, install the bolt and nut.
Tighten the trailing arm to bracket through bolt and nut to 60 Nm (44 lb ft) plus 60 degrees.
2. Position the trailing arm to the vehicle.
