G6 V6-3.9L (2009)
Shift Cable: Service and Repair
6T70/6T75 - Automatic Transmission
Range Selector Lever Cable Replacement
Range Selector Lever Cable Replacement
Removal Procedure
1. Set the park brake and chock the wheels.
2. Disconnect the transaxle range selector lever cable terminal (1) from the transaxle manual shift lever pin (5).
3. Remove the retainer (2) from the transaxle range selector lever cable.
4. Press the locking tabs inward in order to release the transaxle range selector lever cable (3) from the cable bracket (4).
5. Remove the console. Refer to Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair).
