G6 V6-3.9L (2009)
1. Guide the transaxle shift control cable through the pass-through in the cowl panel.
2. Secure the transaxle shift control cable grommet by pressing the grommet into the pass-through hole in the cowl panel.
3. Install the transaxle range selector lever cable to the transaxle control lever base. Ensure the cable retainer (2) is fully secured to the transaxle
control lever base.
4. Connect the transaxle range selector lever cable terminal (1) to the shift lever pin.
5. Install the console. Refer to Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair).