G6 V6-3.9L (2009)
3. Install the transaxle brace (2) with bolt (3) seated in the brace.
4. Install the transaxle brace bolt (1) and tighten to 50 Nm (37 lb ft).
5. Tighten brace bolt (3) to 100 Nm (74 lb ft).
6. Install the transmission mount to bracket through bolt (1) and tighten to 90 Nm (66 lb ft).
7. Remove the jack stand.
8. Install the left tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
9. Lower the vehicle.
