G8 V6-3.6L (2008)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Fascia Reflector Replacement
Rear Bumper Fascia Reflector Replacement
Removal Procedure
1. Remove rear bumper fascia molding. Refer to Rear Bumper Fascia Molding Replacement () .
2. Remove the rear bumper fascia molding to rear bumper fascia reflector retaining screw (4).
Important: Care should be taken not to damage the rear bumper fascia reflector retaining clip (2)
3. Remove the rear bumper fascia reflector (1) from the rear bumper fascia molding (3).
Installation Procedure
Important: Make sure that the rear bumper fascia reflector retaining clip (2) engages the rear bumper fascia molding (3).
1. Install the rear bumper fascia reflector (1) to the rear bumper fascia molding (3).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the rear bumper fascia molding to rear bumper fascia reflector retaining screw (4).
Tighten the screws to 2.0 N.m (18 lb in).
3. Install the rear bumper fascia molding. Refer to Rear Bumper Fascia Molding Replacement () .