G8 V6-3.6L (2008)
Important: The lock actuating rod (2) pushes into the lock cylinder retaining clip (1).
7. Install the lock actuating rod (1) to the lock cylinder retaining clip (2) (if fitted).
8. Inspect for the correct operation of the door handle, lock cylinder (if fitted), and door latch.
Important: Firmly press the water deflector where adhesive is applied to make sure water tight bond.
9. Install the rear half of the water deflector to the door panel.
10. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (See: Front Door Panel/Service and Repair) .