G8 V6-3.6L (2008)
Front Subframe: Service and Repair
Front Frame Replacement
Tools Required
EN 46114 Engine Lift Bracket
Removal Procedure
Caution: Refer to Safety Glasses Caution (See: Service Precautions/Technician Safety Information/Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (See: Maintenance/Vehicle Lifting/Service Precautions) .
1. Remove the engine dress cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement) for 3.6L Engines or Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Cover Replacement) for 6.0L Engines.
2. Remove the radiator air baffle. Refer to Radiator Air Upper Baffle and Deflector Replacement (See: Engine, Cooling and Exhaust/Cooling
System/Radiator/Service and Repair) .
3. Position the EN 46114 (1) on the cylinder head (2).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the EN 46114 to cylinder head retaining bolts (3).
Tighten the EN 46114 to cylinder head retaining bolts (3) to 50 N.m (36 lb ft).