G8 V6-3.6L (2008)
1. Install the end panel (2) to the front floor console.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the end panel to front floor console retaining screws (1).
Tighten the screws to 2 N.m (18 lb in).
Important: The front floor console lower trim panel (1) is retained by clips. Make sure all the clips are aligned with the front floor
console and are engaged to avoid an induced rattle condition.
3. Install the front floor console lower trim panel (1) to the end panel (2). Listen for an audible click to confirm fitting.