pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Body Hinge Pillar Trim Panel Replacement|Page 20038 > < Body Hinge Pillar Trim Panel Replacement|Page 20036
Page 31
background image

1. Partially detach the weatherstrip. Refer to Front Door Opening Weatherstrip Replacement  (See: Doors, Hood and Trunk/Doors/Front Door/Front

Door Weatherstrip/Service and Repair) .

2. Remove the defroster grille. Refer to Defroster Grille Replacement (LWB)  (See: Heating and Air Conditioning/Air Register/Service and

Repair/Defroster Grille Replacement (LWB)) .

Important:  Carefully pull the windshield garnish moulding (2) away from the A pillar body panel (1) to disengage the windshield garnish
moulding retaining clips (3) from the A pillar body panel (1).

3. Disengage the windshield garnish moulding (2) from the A pillar body panel (1).

Important:  Rotate the windshield garnish moulding to A pillar body panel retaining strap (1) to align the slot in the windshield garnish
moulding (2).

4. Remove the windshield garnish moulding to A pillar body panel retaining strap (1) from the windshield garnish moulding (2).
5. Remove the windshield garnish moulding (2) from the vehicle.

Installation Procedure

Body Hinge Pillar Trim Panel Replacement|Page 20038 > < Body Hinge Pillar Trim Panel Replacement|Page 20036