G8 V6-3.6L (2008)
11. Connect the active occupant sensing (AOS) control module.
12. Install the seat back assembly. Refer to Front Seat Back Replacement (See: Seat Back/Service and Repair/Front Seat Back Replacement) .
13. Install the front seat. Refer to Front Seat Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket) .
14. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and
Disarming/Service and Repair) .
15. Connect the battery ground cable to the battery. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair) .
16. Re-zero the inflatable restraint passenger presence system. Refer to Passenger Presence System Programming and Setup (See: Testing and
Inspection/Programming and Relearning) .
17. Test seat for correct mechanical and electrical operation.
Seat Cushion Inner Trim Panel Replacement
Seat Cushion Inner Trim Panel Replacement
Removal Procedure
1. Remove the seat belt buckle. Refer to Driver or Passenger Seat Belt Buckle Replacement (See: Restraint Systems/Seat Belt Systems/Seat Belt
Buckle/Service and Repair/Driver or Passenger Seat Belt Buckle Replacement) .
2. Remove the front seat inner trim (1) to hinge assembly retaining screw (2).
3. Firmly grasped the top of the front seat inner trim (1) and disengage the retaining clip.
4. Remove the front seat cushion inner trim (1).
Installation Procedure