G8 V6-3.6L (2008)
4. Connect the wheel speed sensor jumper harness electrical connector (4).
5. Install the right hand front wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
6. Lower the vehicle.
7. Connect the wheel speed sensor jumper harness electrical connector (1).
8. Use the scan tool in order to clear any DTCs.
9. Perform the System Check-Vehicle. Refer to Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnostic System Check - Vehicle) .
Removal Procedure - Left
Caution: Refer to Safety Glasses Caution (See: Service Precautions/Technician Safety Information/Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (See: Maintenance/Vehicle Lifting/Service Precautions) .
Caution: Refer to Brake Dust Caution (See: Service Precautions/Technician Safety Information/Brake Dust Caution) .