G8 V6-3.6L (2008)
3. Install the brake disc (2) to the hub/axle flange. Use the matchmark (1) made prior to removal for correct orientation to the flange.
4. If the brake disc was removed and installed as part of a brake system repair, measure the assembled lateral runout (LRO) of the brake disc to make
sure optimum performance of the disc brakes. Refer to Brake Rotor Assembled Lateral Runout Measurement (See: Testing and Inspection/Brake
Rotor Assembled Lateral Runout Measurement) .
5. If the brake disc assembled LRO measurement exceeds the specification, bring the LRO to within specifications. Refer to Brake Rotor Assembled
Lateral Runout Correction (See: Testing and Inspection/Brake Rotor Assembled Lateral Runout Correction) .