G8 V6-3.6L (2008)
9. Remove the brake hose to brake caliper banjo retaining bolt (4).
Important: Install a rubber cap or plug on the exposed brake hose end in order to prevent fluid loss and contamination.
10. Separate the brake hose to brake caliper banjo retaining bolt (4) from the brake hose (2).
Important: Copper brake hose sealing washers become work hardened due to the heat generated with brake applications and will not
reseal. Install NEW copper brake hose sealing washers (3) whenever the brake hose to brake caliper banjo retaining bolt (4) is removed.
11. Remove and discard the two copper brake hose sealing washers (3). The copper brake hose sealing washers (4) may be stuck to the brake caliper
(1) and/or the brake hose (2).
Important: Bolts with micro-encapsulated thread sealant must be discarded after removal.
12. Remove the brake caliper anchor plate to knuckle retaining bolts (5) and discard.
13. Remove the brake caliper assembly (1) from the front hub assembly.
Installation Procedure
Caution: Refer to Safety Glasses Caution (See: Service Precautions/Technician Safety Information/Safety Glasses Warning) .
Caution: Refer to Vehicle Lifting Caution (See: Maintenance/Vehicle Lifting/Service Precautions) .
Caution: Refer to Brake Dust Caution (See: Service Precautions/Technician Safety Information/Brake Dust Caution) .
Caution: Refer to Brake Fluid Caution (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid Caution) .
Caution: Refer to Brake Fluid Irritant Caution (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Caution) .
Notice: Refer to Adding Fluid to the Brake System Notice (See: Service Precautions/Technician Safety Information/Adding Fluid to the Brake
System Notice) .
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice (See: Service Precautions/Vehicle Damage Warnings/Brake
Fluid Effects on Paint and Electrical Components Notice) .
