G8 V6-3.6L (2008)
1. Inspect the fluid level in the brake master cylinder reservoir (1).
*
If the brake fluid level is midway between the maximum - fill level and the minimum allowable level, no brake fluid needs to be removed from
the master cylinder reservoir (2) before proceeding.
Important: DO NOT completely empty the master cylinder reservoir (2) or remove any brake lines otherwise complete bleeding of
the braking system will be necessary.
Important: DO NOT re use the removed fluid.
*
If the brake fluid level is higher than midway between the maximum - fill level and the minimum allowable level, syphon the brake fluid to the
midway point using a hand vacuum pump (1) before proceeding.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
3. Remove the rear wheels. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .