G8 V6-3.6L (2008)
Brake Caliper: Overhaul
Front Brake Caliper Overhaul
Front Brake Caliper Overhaul
Caution: Refer to Brake Fluid Irritant Caution (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Caution) .
Caution: Refer to Brake Dust Caution (See: Service Precautions/Technician Safety Information/Brake Dust Caution) .
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid
Effects on Paint and Electrical Components Notice) .
Disassembly Procedure
Important:
*
Replace all the components included in the repair kit used to service the brake caliper.
*
Lubricate the rubber parts with NEW HN-1796 brake fluid to make assembly easier.
*
If any hydraulic component is removed or disconnected, it may be necessary to bleed all or part of the brake system.
*
The torque values specified are for dry, non-lubricated fasteners.
*
Perform the service operations on a clean bench, free from all mineral oil materials.
1. Remove the brake caliper from the vehicle. Refer to Front Brake Caliper Replacement (See: Removal and Replacement/Front Brake Caliper
Replacement) .
2. Drain the brake fluid from the brake caliper.
Important: To remove the guide pin bolts (8) use a suitable tool to hold the flat section on the guide pins (6) whilst loosening the guide pin
retaining bolts (8).