G8 V6-3.6L (2008)
2. Install the master cylinder reservoir (2) to the master cylinder body (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the master cylinder reservoir to master cylinder retaining screws (1).
Tighten the screws to 2.0 N.m (18 lb in).
4. Install the master cylinder. Refer to Master Cylinder Replacement (See: Master Cylinder Replacement) .
5. Connect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair) .
Master Cylinder Replacement
Master Cylinder Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution (See: Starting and Charging/Battery/Service Precautions/Technician Safety Information/Battery
Disconnect Caution) .
1. Disconnect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair) l.
Caution: Refer to Brake Fluid Caution (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid Caution) .
Caution: Refer to Brake Fluid Irritant Caution (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Caution) .
Notice: Refer to Adding Fluid to the Brake System Notice (See: Service Precautions/Technician Safety Information/Adding Fluid to the Brake
System Notice) .
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice (See: Service Precautions/Vehicle Damage Warnings/Brake