G8 V6-3.6L (2008)
5. Position the EN 46114 (2) on the engine (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
6. Install the EN 46114 to cylinder head retaining bolts (3).
Tighten the bolts to 50 N.m (36 lb ft).
Important: Use a suitable tool to raise the engine.
Important: When lifting the engine assembly, observe the clearance between the rear of the engine assembly and the dash panel.
7. Raise the engine until the weight of the engine is removed from the left hand engine mount.